Samtan Engineering Corporation, Metal Stamping and Deep Drawings Since 1962

Pipe Clamps & Pipe Hangers

Home
Metal Stampings & Deep Drawings
Marine Products
Engineering & Quality Control
Industry Awards
About Us
Industry Links
News Release
Contact Us

Samtan Engineering offers a full line of Pipe Clamps and Pipe Hangers in standard sizes from 1⁄4" IPS through 6" IPS approved for use on both hot & cold piping systems in Naval and commercial shipping. Samtan pipe clamps and pipe hangers are manufactured in accordance with relevant sections of the following drawings:

NAVSHIPS Drawings #: 810-1385781, 810-1385782, 810-4714432, 845-2069186, 845-2445497, 845-2445498

BUSHIPS Drawings #: 845-1889878, 845-1889880

Samtan pipe clamps are constructed using mild steel, stainless steel, or aluminum and are available in several configurations with a variety of finishes. The stainless and aluminum clamps are typically available plain; while the steel clamps are typically available plain, hot-dip galvanized, or painted with a weldable zinc chromate primer. Special finishes, such as heat-resistant coatings and epoxy coatings, are available per customer request.

Samtan Engineering pipe clamps are currently offered in several styles:

pipe clamp #1
FIGURE 1

Figure I shows the most common pipe clamp manufactured here at Samtan; the standard "clip type" pipe clamp. These clamps are offered with a neoprene rubber liner for cold systems or a fiberglass liner for steam and other high temperature applications.

 

pipe clamp #2
FIGURE II

Figure II illustrates a clip type clamp with an extended support leg. The extended leg is available in any length required by our customers. These clamps are offered with a neoprene rubber liner for cold systems or a fiberglass liner for steam and other high temperature applications.

 

pipe clamp #3
FIGURE III

Figure III depicts our welded single-leg clamp. This design features a support leg welded to the clamp body, with the leg available in any length required by our customers. These clamps are offered with a neoprene rubber liner for cold systems or a fiberglass liner for steam and other high temperature applications.

 

pipe clamp #4
FIGURE IV

Figure IV shows the formed double-leg style of pipe clamp. The support legs are available in any length required by our customers. These clamps are offered with a neoprene rubber liner for cold systems or a fiberglass liner for steam and other high temperature applications.

 

In addition to our pipe clamp line, Samtan Engineering also offers "Key-Lock" pipe hangers, rubber block pipe supports, and steel block pipe supports.

Samtan "Key-Lock" pipe hangers, available in standard sizes from 3/8" through 4" IPS, feature a mild steel or stainless steel hanger body with a welded (flat bar or angle) support leg, a neoprene rubber or fiberglass liner, and a locking key made from mild or stainless steel. The stainless steel hangers are typically available plain, while the mild steel clamps are typically available painted with a weldable zinc chromate primer. Special finishes, such as heat-resistant coatings and epoxy coatings, are available per customer request.

holder #1

RUBBER BLOCK PIPE HANGERS AND STEEL BLOCK PIPE HANGERS

A popular alternative to our standard line of pipe clamps is our line of single- and multiple-pipe rubber block pipe hangers and steel block pipe hangers.

The rubber block hangers feature mild steel bars (or channels, depending on pipe size) sandwiching neoprene hanger blocks and are typically available with plain, hot-dip galvanized, or painted bars.

 

 

The steel block hangers feature mild steel hanger blocks surrounding neoprene pipe bushings and are available with plain, hot-dip galvanized, or painted blocks.

holder #2

holder #3

2003 Samtan Engineering

 

 

Samtan Engineering Corporation
127 Wyllis Avenue, Malden, Massachusetts 02148, USA
(781) 322-7880 Phone • (781) 397-7684 Fax
 • Email: george@samtanengineering.com